Contactor 63A, 2HB, 230V Hager ESC263 ESC263
The Hager ESC263 standard contactor with two normally open contacts is used for frequent starts of installations with high load currents.
Manufacturer
HAGER
Артикул: ESC263
In stock
Buy in 1 click
1889,69 грн.
Delivery
Self-pickup
By courier in Kyiv - by arrangement.
In Ukraine - according to the carrier's rates center;">(Free delivery when ordering for
from 3000 UAH. for some product groups)
Guarantee
Exchange/return of goods within 14 days
Official warranty from
manufacturer
Cash, non-cash (including VAT).
PrivatBank, Oschadbank
Device type: Modular contactor
Rated current AC-1: 63 A
Number of contacts: 2 HV
Rated control coil voltage: 230 V AC
Control coil frequency: 50/60 Hz
Number of poles: 2
Rated insulation voltage Ui: 500 V
Rated impulse withstand voltage Uimp: 4 kV
Switching power AC-1 at 230 V: 10.4 kW
Switching power AC-1 at 400 V: 24.5 kW
Switching power AC-3 at 230 V: 2.8 kW
Switching power AC-3 at 400 V: 5.5 kW
Coil (starting) power consumption: 28 VA
Coil power consumption (holding): 4.7 VA
Mechanical life: 1,000,000 cycles
Electrical life AC-1: 100,000 cycles
Maximum number of switching operations per hour: 300
Device protection rating: IP40
Terminal protection rating: IP20
Operating temperature range: -10...+50 °C
Storage temperature range: -40...+80 °C
Cross-section of connected conductors (rigid): 1.5 - 25 mm²
Cross-section of connected conductors (flexible): 1.5 - 16 mm²
Terminal tightening torque: 2.8 Nm
Width in DIN modules: 2
Height: 83 mm
Depth: 60 mm
Standard: IEC 61095
Overvoltage category: III
Contact material: AgNi
Mounting type: DIN rail
Working voltage of power contacts: 230/400 V
Rated current AC-1: 63 A
Number of contacts: 2 HV
Rated control coil voltage: 230 V AC
Control coil frequency: 50/60 Hz
Number of poles: 2
Rated insulation voltage Ui: 500 V
Rated impulse withstand voltage Uimp: 4 kV
Switching power AC-1 at 230 V: 10.4 kW
Switching power AC-1 at 400 V: 24.5 kW
Switching power AC-3 at 230 V: 2.8 kW
Switching power AC-3 at 400 V: 5.5 kW
Coil (starting) power consumption: 28 VA
Coil power consumption (holding): 4.7 VA
Mechanical life: 1,000,000 cycles
Electrical life AC-1: 100,000 cycles
Maximum number of switching operations per hour: 300
Device protection rating: IP40
Terminal protection rating: IP20
Operating temperature range: -10...+50 °C
Storage temperature range: -40...+80 °C
Cross-section of connected conductors (rigid): 1.5 - 25 mm²
Cross-section of connected conductors (flexible): 1.5 - 16 mm²
Terminal tightening torque: 2.8 Nm
Width in DIN modules: 2
Height: 83 mm
Depth: 60 mm
Standard: IEC 61095
Overvoltage category: III
Contact material: AgNi
Mounting type: DIN rail
Working voltage of power contacts: 230/400 V
