Contactor 25A, 1NC, 230V Hager ESC126
The Hager ESC126 standard contactor with one normally closed contact is used for frequent starts of installations with high load currents.
Manufacturer
HAGER
Артикул: ESC126
Под заказ
Buy in 1 click
737,78 грн.
Delivery
Self-pickup
By courier in Kyiv - by arrangement.
In Ukraine - according to the carrier's rates center;">(Free delivery when ordering for
from 3000 UAH. for some product groups)
Guarantee
Exchange/return of goods within 14 days
Official warranty from
manufacturer
Cash, non-cash (including VAT).
PrivatBank, Oschadbank
Number of poles: 2
Contact type: 2NO
Rated operational current AC-1: 25 A
Rated operational current AC-7a: 25 A
Rated operational current AC-7b: 8.5 A
Rated control coil voltage: 230 V AC
Control coil frequency: 50/60 Hz
Rated insulation voltage Ui: 400 V
Rated impulse withstand voltage Uimp: 4 kV
Maximum switching power AC-1 at 400 V: 5.5 kW
Maximum switching power AC-3 at 230 V: 1.8 kW
Maximum switching power AC-3 at 400 V: 3 kW
Coil power consumption at start-up: 22 VA
Power consumption of the coil when holding (working): 3.8 VA
Electrical durability (AC-7a / AC-7b): 150,000 cycles
Mechanical durability: 1,000,000 cycles
Maximum switching frequency (AC-7a / AC-7b): 100 operations / hour
Operating temperature range: from -10 to +50 ° C
Storage temperature range: from -40 to +80 ° C
Degree of protection of terminals: IP20
Degree of protection with cover installed: IP40
Mounting method: On a DIN rail
Cross-section of connected power conductors (flexible): from 1 to 25 mm²
Cross-section of connected power conductors (rigid): from 1 to 35 mm²
Cross-section of connected coil conductors (flexible): from 1 to 1.5 mm²
Cross-section of connected coil conductors (rigid): from 1 to 2.5 mm²
Tightening torque of power terminals: 3.5 Nm
Tightening torque of coil terminals: 0.8 Nm
Number of occupied modules on a DIN rail: 2
Width: 35 mm
Height: 83 mm
Depth: 60 mm
Weight: 230 g
Compliance standards: EN 61095, IEC 61095
Installation position: Any
Contact type: 2NO
Rated operational current AC-1: 25 A
Rated operational current AC-7a: 25 A
Rated operational current AC-7b: 8.5 A
Rated control coil voltage: 230 V AC
Control coil frequency: 50/60 Hz
Rated insulation voltage Ui: 400 V
Rated impulse withstand voltage Uimp: 4 kV
Maximum switching power AC-1 at 400 V: 5.5 kW
Maximum switching power AC-3 at 230 V: 1.8 kW
Maximum switching power AC-3 at 400 V: 3 kW
Coil power consumption at start-up: 22 VA
Power consumption of the coil when holding (working): 3.8 VA
Electrical durability (AC-7a / AC-7b): 150,000 cycles
Mechanical durability: 1,000,000 cycles
Maximum switching frequency (AC-7a / AC-7b): 100 operations / hour
Operating temperature range: from -10 to +50 ° C
Storage temperature range: from -40 to +80 ° C
Degree of protection of terminals: IP20
Degree of protection with cover installed: IP40
Mounting method: On a DIN rail
Cross-section of connected power conductors (flexible): from 1 to 25 mm²
Cross-section of connected power conductors (rigid): from 1 to 35 mm²
Cross-section of connected coil conductors (flexible): from 1 to 1.5 mm²
Cross-section of connected coil conductors (rigid): from 1 to 2.5 mm²
Tightening torque of power terminals: 3.5 Nm
Tightening torque of coil terminals: 0.8 Nm
Number of occupied modules on a DIN rail: 2
Width: 35 mm
Height: 83 mm
Depth: 60 mm
Weight: 230 g
Compliance standards: EN 61095, IEC 61095
Installation position: Any
