Contactor 25A, 2NC, 230V Hager ESC226
The Hager ESC226 standard contactor with two normally closed contacts is used for frequent starts of installations with high load currents.
Manufacturer
HAGER
Артикул: ESC226
In stock
Buy in 1 click
762,53 грн.
Delivery
Self-pickup
By courier in Kyiv - by arrangement.
In Ukraine - according to the carrier's rates center;">(Free delivery when ordering for
from 3000 UAH. for some product groups)
Guarantee
Exchange/return of goods within 14 days
Official warranty from
manufacturer
Cash, non-cash (including VAT).
PrivatBank, Oschadbank
Rated Current (AC-1): 25 A
Contact Configuration: 2 NC
Rated Control Voltage: 230 V AC
Number of Poles: 2
Rated Operational Voltage: 230/400 V AC
Frequency: 50/60 Hz
Rated Insulation Voltage: 440 V AC
Rated Impulse Withstand Voltage: 4 kV
Utilization Category: AC-1, AC-3, AC-7a, AC-7b
Rated Current AC-1: 25 A
Rated Current AC-3: 8.5 A
Rated Current AC-7a: 25 A
Rated Current AC-7b: 8.5 A
Rated Power AC-3 at 230 V: 1.8 kW
Rated Power AC-3 at 400 V: 3.7 kW
Electrical durability (AC-1/AC-7a): 100,000 cycles
Mechanical durability: 1,000,000 cycles
Coil power consumption at start-up: 28 VA
Coil power consumption during holding: 4.6 VA
Coil active power during holding: 1.2 W
Operating temperature range: from -10 to +50 °C
Storage temperature range: from -40 to +70 °C
Degree of protection (terminals): IP20
Degree of protection (when installed in a panel): IP40
Mounting type: DIN rail
Cross-section of connected flexible conductor: from 1 to 6 mm²
Cross-section of connected rigid conductor: 1 to 10 mm²
Terminal tightening torque: 0.8 Nm
Width: 1 module (17.5 mm)
Height: 83 mm
Depth: 68 mm
Weight: 132 g
Conforms to standards: IEC/EN 61095
Contact Configuration: 2 NC
Rated Control Voltage: 230 V AC
Number of Poles: 2
Rated Operational Voltage: 230/400 V AC
Frequency: 50/60 Hz
Rated Insulation Voltage: 440 V AC
Rated Impulse Withstand Voltage: 4 kV
Utilization Category: AC-1, AC-3, AC-7a, AC-7b
Rated Current AC-1: 25 A
Rated Current AC-3: 8.5 A
Rated Current AC-7a: 25 A
Rated Current AC-7b: 8.5 A
Rated Power AC-3 at 230 V: 1.8 kW
Rated Power AC-3 at 400 V: 3.7 kW
Electrical durability (AC-1/AC-7a): 100,000 cycles
Mechanical durability: 1,000,000 cycles
Coil power consumption at start-up: 28 VA
Coil power consumption during holding: 4.6 VA
Coil active power during holding: 1.2 W
Operating temperature range: from -10 to +50 °C
Storage temperature range: from -40 to +70 °C
Degree of protection (terminals): IP20
Degree of protection (when installed in a panel): IP40
Mounting type: DIN rail
Cross-section of connected flexible conductor: from 1 to 6 mm²
Cross-section of connected rigid conductor: 1 to 10 mm²
Terminal tightening torque: 0.8 Nm
Width: 1 module (17.5 mm)
Height: 83 mm
Depth: 68 mm
Weight: 132 g
Conforms to standards: IEC/EN 61095
