Volter-2100 Volter-2100

Volter ™ Voltage Stabilizer -2100 applications, primarily for powering audio-video and consumer equipment in the form of voltage strippers, released for the Japanese and American markets by 100 and 120 V, there are also three sockets for 230 V.

In a modern electrical warehouse, a high accuracy of output voltage is achieved with voltage variations + 2% -3%. On the front panel of the stabilizer there is a power button, a rare crystal indicator, as well as buttons for changing the parameters of the stabilizer operation.

In the basic mode there is a rare crystal stabilizer indicator Volter-2100 displays the level of input and output voltage (for U volt. = 230 V), the power of the current flow, the state of the electronic keys, the current hour and the correct value of the output voltage (as was carried out correction). The soaking mode has a fixed hour. When adjusting the total voltage of the voltage that is connected to the Volter-2100 stabilizer, the voltage of the voltage that is connected to the 100 and 120 V output must be multiplied by two.

The total power of the connection that can be connected to an output of 100 and 120 V does not exceed 1 kW. If the voltage supply at the 100 and 120 V output indicates 1 kW, then the connection to the 230 V output is blocked. In this case, the protection of re-voltage will occur.

Respect! The stabilizer has sockets with different output voltages - 100, 120 and 230V. It is prohibited to connect equipment rated for a nominal voltage of 100 and 120 V to sockets with an output voltage of 230 V!