Volter-2100 voltage stabilizer

The Volter™-2100 voltage stabilizer is designed primarily to protect audio, video, and household appliances from power surges, manufactured for the Japanese and American markets at 100 and 120 V. Three 230 V sockets are also available.

Thanks to the modern electrical component of the device, high output voltage accuracy is achieved with a deviation of +2% -3%. On the front panel of the stabilizer there is a power button, a liquid crystal indicator, and buttons for changing the operating parameters of the stabilizer. In normal mode, the Volter-2100 stabilizer's liquid crystal indicator displays the input and output voltage level (for Uout. = 230 V), the consumed current, the state of the electronic keys, the current time, and the correction value of the output voltage (if any correction was made). In standby mode, the current time is displayed. When calculating the total load power connected to the Volter-2100 stabilizer, the load power connected to the 100 and 120 V output must be multiplied by (2).

The total load power that can be connected to the 100 and 120 V output does not exceed 1 kW. If the load at the 100 and 120 V output corresponds to 1 kW, then the load cannot be connected to the 230 V output. Otherwise, overload protection will be triggered.

Attention! The stabilizer has sockets with different output voltages - 100, 120 and 230 V. It is prohibited to connect equipment designed for a nominal voltage of 100 and 120 V to sockets with an output voltage of 230 V!