Voltage stabilizer Eleks Hybrid U 7-1/10 v2.0
The single-phase voltage stabilizer Hybrid U 7-1/10 v2.0 is designed for operation in electrical networks with voltage fluctuations from 135 to 275V (145-275V for low-power products). In this range, the device is guaranteed to produce an output voltage within 220±7.5%, which is ensured by the use of 7 stabilization stages.
The Hybrid range of power models is available in 5.5, 7, 9 kW models, which corresponds to an operating current of 25, 32, 40 A, respectively, as well as low power models of 2.2 and 3.5 kW with an operating current of 10 and 16 A.
This stabilizer can work with "green" power supply systems.
It is recommended to install and operate the Hybrid U 7-1/10 v2.0 stabilizer in dry and heated rooms. Wall mounting is recommended in a vertical position (with fans facing up), leaving 10-15 cm at the top and bottom for cooling. Connection is made to existing wiring via a terminal block for units from 5.5 to 9 kW and via a built-in cord with a plug and socket on the stabilizer body for 2.2 and 3.5 kW models.
Артикул: LP16252
Delivery
Self-pickup
Exchange/return of goods within 14 days
Official warranty from
manufacturer
Cash, non-cash (including VAT).
PrivatBank, Oschadbank
| Key type | triac, duplicated by an electromagnetic relay |
| Operating current, A | 10 |
| Rated power, VA/W | 2200/2200 |
| Number of stabilization stages | 7 |
| Stabilizer efficiency not less than, % | 98 |
| Power consumption at idle no more than, W | 15 |
| Rated output voltage, V | 220 |
| Minimum working input voltage, V | 130 |
| Maximum operating input voltage, V | 295 |
| Stabilization accuracy, % | 7.5 |
| Response time to input voltage change, ms | 100 |
| Power line frequency, Hz | 45-65 |
| Input current and apparent power measurement | no |
| Short-circuit and overload current limitation | input circuit breaker with B-characteristic of electromagnetic protection |
| Electronic Bypass | no |
| Network and stabilizer status analyzer | yes |
| Duplicate overvoltage protection | yes |
| Microcontroller control | yes |
| Input choke | no |
| Output choke | no |
| Overheat protection | yes |
| Forced cooling | fan |
| Length, mm | 225 |
| Width, mm | 145 |
| Height, mm | 380 |
| Warranty, months | 24 |
| Weight, kg | 13.5 |
| Volume, cubic meters | 0.012398 |
