Voltage stabilizer Eleks Gerts U 36-1/125 v3.0

The GERTS U 36-1/125 v3.0 single-phase voltage stabilizer is designed for use in electrical networks with voltage fluctuations from 150 to 260 V. In this range, the device guarantees an output voltage of 220 ±1-1.5%, achieved through the use of 36 stabilization stages. The Hertz model range in power can be 5.5, 7, 9, 11, 14, 18, 22 and 27.5 kW, which corresponds to an operating current of 25, 32, 40, 50, 63, 80, 100 and 125 A, respectively.

The features of this stabilizer include an informative LCD screen, event memory, the highest stabilization accuracy, plotting voltage and load graphs, a three-language interface, the presence of electronic transit (bypass), and silent operation due to the use of triacs (thyristors) as power keys.

If it is necessary to obtain a voltage different from 220 V in Hertz at the stabilizer output, there is a function for adjusting this value in the range of 200-230 V.

The Hertz stabilizer has the ability to manually adjust the lower shutdown threshold (60-135 V). This feature is useful for loads with high inrush currents, which can cause a significant voltage drop and emergency shutdown of the stabilizer upon startup. When this option is activated, the stabilizer will start any motor or pump within a minute, even if the voltage drops to 60V in the network.

It is recommended to install and operate the GERZ U 36-1/125 v3.0 stabilizer in dry and heated rooms. When wall-mounted, it is recommended to install it vertically (with the fans facing upward), leaving 10-15 cm of space above and below for cooling. Connection is made to existing wiring via a terminal block.