Voltage stabilizer Eleks Amper-T U 16-1/80 v2.1

The Amper-T U 16-1/80 v2.1 single-phase voltage stabilizer (precise) is designed for use in electrical networks with voltage fluctuations from 145 to 275V. Within this range, the device guarantees an output voltage of 220±2.7%, achieved through the use of 16 stabilization stages. The rated power of this model is 18 kW, which corresponds to the operating current of the circuit breaker of 80 A on it.

The features of this stabilizer include a double LED screen, a linear loading strip, the presence of an electronic transit (bypass), a convenient location of the terminal block for connection on the rear of the case, silent operation due to the use of thyristors as power keys.

If it is necessary to obtain a voltage at the stabilizer output different from 220V, the Amper-T U 16-1/80 v2.1 has a function for adjusting this value in the range of 200-230 V ±2.7%.

The Amper-T U 16-1/80 v2.1 stabilizer has the ability to manually adjust the lower shutdown threshold (60-135V). This function is in demand for loads with high inrush currents, during the start of which a strong voltage drop and emergency shutdown of the stabilizer are possible. When this option is activated, the stabilizer will start any motor or pump within a minute, even if the network voltage drops to 60V. It is recommended to install and operate the Amper-T U 16-1/80 v2.1 stabilizer in dry, heated rooms. It is recommended to wall-mount it vertically (with the fans facing up), leaving 10-15 cm of clearance at the top and bottom for cooling. Connection is made to existing wiring via a terminal block.