UPS (uninterruptible power supply) for routers/switches LP-418PRO

UPS (uninterruptible power supply) for routers/switches LP-418PRO

The uninterruptible power supply (UPS) LP-418PRO ensures autonomous operation of the following equipment in case of emergency or planned power outages:

• Wi-Fi routers

• routers

• terminals

• media converters

• and other low-voltage equipment

The UPS for a 12-volt router is equipped with a built-in 8000 mAh battery. In practice, your router (depending on consumption) will be able to operate without interruption for up to 10 hours.

Autonomous power supply for a router: operating principle

A router, ONU terminal or other equipment is connected to the UPS through the appropriate 5/9/12V port.

The UPS is connected to the network through a standard 220 V outlet, performing the functions of a switching power supply in normal mode.

When the power is cut off from the general network, the UPS automatically switches to battery mode.

After the power is restored, the battery is automatically charged by the uninterruptible power supply from the 220 V network.

Advantages of using the LP-418PRO UPS for routers/switches

• Supports POE technology (for transmitting power through the connector RJ45) for 15V and 24V. 

• Switchover time to backup power is 0 ms.

• Time to fully charge the built-in battery - up to 2 hours.

• Indication of the operating mode and battery charge level.

• Battery protection from insufficient charge or overdischarge