Time relay ETR4-69-A EATON
Артикул: 31891
Delivery
Self-pickup
Exchange/return of goods within 14 days
Official warranty from
manufacturer
Cash, non-cash (including VAT).
PrivatBank, Oschadbank
Supply voltage: 24-240 V AC/DC
Supply voltage frequency: 50/60 Hz
Number of functions: 8
Functions: A (on-delay)
Functions: B (off-delay by control signal)
Functions: C (off-delay)
Functions: D (on-/off-delay)
Functions: E (pulse generation when voltage is applied)
Functions: F (pulse generation by the leading edge of the control signal)
Functions: G (flashing, starting with a pause)
Functions: H (flashing, starting with a pulse)
Number of time delay ranges: 7
Time delay ranges: 0.05-1 s
Time delay ranges: 0.5-10 s
Time delay ranges: 5-100 s
Time delay ranges: 0.5-10 min
Time delay ranges: 5-100 min
Time delay ranges: 0.5-10 h
Time delay ranges: 5-100 h
Output contact type: 1 changeover contact (SPDT)
Contact current rating (AC-15, 230V): 3 A
Contact current rating (DC-13, 24V): 1.5 A
Switching capacity (AC-1): 1500 VA
Maximum switching voltage: 250 VAC
Minimum switching current: 10 mA at 12 V
Mechanical life: 30 x 10 ^ 6 cycles
Electrical life: 10 ^ 5 cycles (at 3 A, 230 V AC)
Power consumption (AC): 3 VA
Power consumption (DC): 1.5 W
Control input voltage (Start/Gate): 24-240 V AC/DC
Control input current: approximately 1 mA
Indication of power and relay position: Green LED
Indication of output status: Yellow LED
Setting accuracy: ±5%
Repeatability: ±0.5%
Temperature drift: ±0.05%/°C
Minimum duration of control pulse: 50 ms
Reset time: no more than 100 ms
Mounting method: On a DIN rail (EN 50022)
Width: 17.5 mm
Height: 85 mm
Depth: 70 mm
Weight: 0.1 kg
Operating temperature: from -25 ° C to + 55 ° C
Storage temperature: from -40 ° C to + 70 ° C
Degree of protection of the housing: IP40
Degree of protection of the terminals: IP20
Connection type: Screw terminals
Cross-section of the connected rigid conductor: 1 x 2.5 mm² or 2 x 1.5 mm²
Cross-section of the connected flexible conductor with a ferrule: 1 x 2.5 mm² or 2 x 1.5 mm²
Terminal tightening torque: 0.6-0.8 Nm
Overvoltage category: III
Pollution degree: 3
Standards: EN 61812-1
Standards: IEC 61812-1
Standards: VDE 0435
Standards: UL
Standards: CSA
Insulation strength between supply and contacts: 2.5 kV
Insulation strength between contacts: 1 kV
Insulation type: Double insulation (EN 60664-1)
