Surge arrester ETITEC V T2 690/20 4+0 RC ETI
Instantly protect your investment and ensure uninterrupted operation. The ETITEC V T2 surge suppressor is a reliable shield for your electronics from damaging power surges. Forget about costly breakdowns and downtime by choosing the safety and durability of your equipment.
Manufacturer
ETI
Артикул: 2442989
In stock
Buy in 1 click
4176,90 грн.
Delivery
Self-pickup
By courier in Kyiv - by arrangement.
In Ukraine - according to the carrier's rates center;">(Free delivery when ordering for
from 3000 UAH. for some product groups)
Guarantee
Exchange/return of goods within 14 days
Official warranty from
manufacturer
Cash, non-cash (including VAT).
PrivatBank, Oschadbank
SPD type: T2
Rated operating voltage (Un): 690 V AC
Maximum continuous operating voltage (Uc): 750 V AC
Nominal discharge current (In, 8/20 μs): 20 kA
Maximum discharge current (Imax, 8/20 μs): 40 kA
Voltage protection level (Up) at In: < 3.2 kV
Response time (tA): < 25 ns
Number of poles: 4
Protection circuit: 4+0
Protection technology: Varistor (MOV)
Status indication: Optical
Remote signaling: Yes
Remote signaling contact type: Changeover (SPDT)
Maximum switching voltage of remote signaling contact: 250 V AC / 30 V DC
Maximum switching current of the remote signaling contact: 0.5 A
Maximum back-up fuse: 125 A gG
Short-circuit breaking capacity (Isccr): 50 kA
Operating temperature range: -40°C ... +80°C
Enclosure protection rating (IP): IP20
Mounting: On a 35 mm DIN rail
Cross-section of connected conductors (rigid): 1.5 - 35 mm²
Cross-section of connected conductors (flexible): 1.5 - 25 mm²
Module width: 4 DIN modules (72 mm)
Conformity to standards: IEC/EN 61643-11
Rated operating voltage (Un): 690 V AC
Maximum continuous operating voltage (Uc): 750 V AC
Nominal discharge current (In, 8/20 μs): 20 kA
Maximum discharge current (Imax, 8/20 μs): 40 kA
Voltage protection level (Up) at In: < 3.2 kV
Response time (tA): < 25 ns
Number of poles: 4
Protection circuit: 4+0
Protection technology: Varistor (MOV)
Status indication: Optical
Remote signaling: Yes
Remote signaling contact type: Changeover (SPDT)
Maximum switching voltage of remote signaling contact: 250 V AC / 30 V DC
Maximum switching current of the remote signaling contact: 0.5 A
Maximum back-up fuse: 125 A gG
Short-circuit breaking capacity (Isccr): 50 kA
Operating temperature range: -40°C ... +80°C
Enclosure protection rating (IP): IP20
Mounting: On a 35 mm DIN rail
Cross-section of connected conductors (rigid): 1.5 - 35 mm²
Cross-section of connected conductors (flexible): 1.5 - 25 mm²
Module width: 4 DIN modules (72 mm)
Conformity to standards: IEC/EN 61643-11
