LP LiFePO4 battery 28.8V (9S) - 100 Ah (2880Wh) (BMS 100A/50A) plastic Smart BT
Forget about blackouts with a lithium iron phosphate (LiFePO4) battery
The battery is suitable for use with UPS
LP LiFePO4 battery 28.8V (9S) - 100 Ah (2880Wh) (BMS 100A/50A) plastic Smart BT
Maximum energy for a comfortable life
- Time to full battery charge from 2 hours.
- 5 or more hours of autonomous power for your equipment.
- 15 years of effective use.
*Charging time may vary depending on the charging current.
LiFePO4 lithium batteries of the Ukrainian brand LogicPower provide reliable and safe operation for backup power systems of different capacities.
Each model of our batteries is equipped with an advanced battery management system (BMS). This guarantees maximum efficiency, durability and safety in operation.
Advantages LP LiFePO4 28.8V lithium battery
Fast charging and no memory effect:
-
Lithium batteries charge significantly faster than lead-acid batteries. No memory effect means that the battery can be charged and discharged at any charge level without loss of capacity. LiFePO4 batteries are charged with a maximum recommended current of 0.5C, where C is the battery capacity. For the LP LiFePO4 28.8V - 100Ah battery, the maximum charging current should not exceed 140A (0.5 x 280Ah). It is important that this current does not exceed the capabilities of the BMS to maintain safety and prolong the life of the battery.
Longevity
Артикул: LP39597
Delivery
Self-pickup
Exchange/return of goods within 14 days
Official warranty from
manufacturer
Cash, non-cash (including VAT).
PrivatBank, Oschadbank
| Type | LiFePO4 |
| Battery storage temperature, °C | -20 ~ +40 |
| Operating charge temperature, °C | 0 ~ +40 |
| Operating discharge temperature, °C | -20 ~ +60 |
| Nominal voltage, V | 28.8 |
| Nominal capacity, Ah | 100 |
| Capacity, W | 2880 |
| Type terminals | T11 (for M8 bolt) |
| Number of cycles | 7000 |
| Case material | plastic |
| Warranty, months | 60 |
| Nominal charging current, A | 50 |
| Maximum charging current, A | 100 |
| Charging voltage (buffer mode), V | 30.6 |
| Charging voltage (cyclic mode), V | 32.8 |
| Minimum voltage, V | 24.3 |
| Maximum discharge current, A | 100 |
| Cell rating | 100 |
| Reconnection voltage of charge, V | 31.9 |
| Recommended low cut-off voltage, V | 25.2 |
| Reconnection voltage of discharge, V | 23.9 |
| Self-discharge, %/month. | <3% |
| Cell connection diagram | 8S1P |
| Type Balancer | Active up to 1A |
| Communication interface | Bluetooth (RS485 optional) |
| Protection class | IP54 |
| Ambient humidity,% (RH) | 10～80% |
| Cell type | Prismatic |
| Length, mm ** | 501 |
| Width, mm ** | 185 |
| Height, mm ** | 242 |
| Overall dimensions (L x W x H), mm * | 501*185*242 |
| Peak discharge current (100 ms), A | 200 (5 s) |
