LogicPower LPM-PSW-12000VA (8000W) UPS with 48V true sine wave

The LPM-PSW-8000W uninterruptible power supply needs to be inserted. The model has a built-in voltage stabilization function in the range from 160-275 at the input and up to 230±10% at the output.

The UPS must be used only with a battery, which must meet the technical specifications of the device.

3 steps to connect the UPS:

1. Connect the battery, observing the polarity;
2. Connect the UPS to the network by inserting the UPS plug into a 230V outlet;
3. Wait for the self-diagnostics to complete and the UPS to turn on.

Attention! The UPS will turn on automatically! Do not press the power button or interrupt the self-diagnosis!

UPS with a true sine wave and an external battery are used:

• as uninterruptible power supplies for gas or solid fuel heating boilers
• UPS for emergency lighting
• to provide backup power for server stations and telecommunications equipment, thanks to the quick (hot) battery swap function
• UPS with a pure sine wave for circulation pumps
• as a voltage stabilizer with a backup power source for powerful and high-speed computers

Selection of UPS for heating boilers and emergency lighting systems

Before purchasing a UPS with a true (pure) sine wave, the following technical characteristics must be taken into account:

• Total power electrical appliances that will be connected to the UPS. The parameter can be found in the technical documentation for each piece of equipment.

• Starting power - the amount of electricity the device consumes when turned on. To connect the UPS to equipment with high starting currents, you need to choose a more powerful uninterruptible power supply model.

• The time you need for autonomous operation of the pump o