Hybrid inverter MUST PV18-1012VPM, 1000W, 12V, charging current 10/20A, 170-280V, MPPT (60A, 15-105 Vdc), 225x355x92 mm, 5.5 kg
Manufacturer
MUST
Артикул: PV18-1012VPM
In stock
Buy in 1 click
11400,00 грн.
Delivery
Self-pickup
By courier in Kyiv - by arrangement.
In Ukraine - according to the carrier's rates center;">(Free delivery when ordering for
from 3000 UAH. for some product groups)
Guarantee
Exchange/return of goods within 14 days
Official warranty from
manufacturer
Cash, non-cash (including VAT).
PrivatBank, Oschadbank
The Must PV18-1012VPM is a 1 kW inverter with external battery connection and a pure sine wave 220 V output. It features a built-in LCD display for viewing and configuring key parameters. The inverter supports various battery charging modes and prioritizes power supply to loads. The model can be connected to a PC and mobile devices via Wi-Fi (optional). The PV18-1012VPM has a built-in MPPT 15-105 V / 60 A solar charge controller and a grid charger with a maximum current of 20 A. The battery system voltage is 12 V. AGM / GEL / LifeP04 batteries can be connected. The following modes are supported: SUB, SBU, SOL, UEI. SUB (solar, utility, battery) – the connected load is primarily powered by solar generation; when solar generation is insufficient, the difference is obtained from the grid. When solar power and grid power are unavailable, the inverter switches to battery power. The Must PV18-1012VPM helps provide uninterruptible power to consumers at a low cost, as well as reduce grid power consumption costs when using solar power. Its compact design and simple controls make installation and use of this inverter simple and convenient. Features: Output power 1000 W / 1000 VA Overload capacity up to 2000 W. Pure sine wave at the output Compatible with generators Automatic restart after power supply restoration Protection against overload, short circuit and overheating Cold start function Battery voltage 12 V Type of connected batteries: lithium and lead-acid Maximum charging current from the network 20 A Maximum charging current from PV modules up to 60 A Possibility of connection to a PC Possibility of connection via Wi-Fi (optional) Specifications Inverter connection from the AC side 220 V Manufacturer Must Power Model PV18-10 12VP M Inverter type Autonomous (Off-grid) Number of phases 1 Rated power 1000 W / 1000 VA Peak power 2000 WattInput voltage 170~280 VOutput voltage 230 ± 5% from battery during grid failure, 170 – 280 V in AVR mode with stabilization of input voltageOutput voltage waveform Pure sine waveGrid frequency 50 / 60 HzTransfer time ≤ 10 msConnection to the grid terminalsLoad connection terminalsProtection against short circuits, voltage surges, overload, discharge, overcharge of batteriesInverter connection from the battery sideBattery type lithium, lead-acidBMS - Battery connection terminalsNominal battery voltage 12 VCharging current (grid + PV) 70 ACharge current (grid only) 10 A / 20 ACapacity of connected batteries up to 600 AhInverter connection from the side of photovoltaic modules (DC side)Maximum input power 625 WController type MPPTMaximum input voltage 75 VMPPT operating range 15~105 VMaximum input current 60 ANumber of inputs 1 Own consumption 2 WCasing material metalDimensions and weight 225*355*92 mm / 5.5 kgOperating temperature and humidity -15°C~60°C, humidity 5%~95%
