Hager silent contactor, with manual control, 25A, 2HB, 24V ERD225S
Applications: halogen and incandescent lamps; tubular fluorescent lamps (single and double, energy-saving, with electronic transformers, compensated and not); gas-discharge lamps (high-pressure mercury and sodium, metal halide, high and low pressure, compensated and not); resistive loads (cat. AC7a); inductive overloads (cat. AC7b).
Manufacturer
HAGER
Артикул: ERD225S
Под заказ
Buy in 1 click
1706,36 грн.
Delivery
Self-pickup
By courier in Kyiv - by arrangement.
In Ukraine - according to the carrier's rates center;">(Free delivery when ordering for
from 3000 UAH. for some product groups)
Guarantee
Exchange/return of goods within 14 days
Official warranty from
manufacturer
Cash, non-cash (including VAT).
PrivatBank, Oschadbank
Device type: Contactor
Contactor type: Silent
Brand: Hager
Model: ERD225S
Rated current of main contacts (AC-1): 25 A
Rated current of main contacts (AC-7a): 25 A
Number of poles: 2
Configuration of main contacts: 2 NO (normally open)
Presence of manual operation: Yes
Rated coil control voltage: 24 V AC
Control voltage frequency: 50/60 Hz
Coil power consumption when turning on: 8 VA
Coil power consumption when holding: 2.8 VA
Rated working voltage of main contacts (Ue): 230 V AC
400 V AC
Rated insulation voltage (Ui): 500 V AC
Rated Impulse withstand voltage (Uimp): 4 kV
Mechanical life: 1,000,000 cycles
Electrical life (AC-1): 100,000 cycles
Maximum switching frequency: 300 operations/hour
Short-time withstand current (Icw): 1 kA (for 1 s)
Operating temperature range: from -10 ° C to + 50 ° C
Storage temperature range: from -40 ° C to + 70 ° C
Protection class: IP20
Mounting type: On a DIN rail
Device width (in modules): 2 modules
Maximum cross-section of connected rigid wire: 10 mm²
Maximum cross-section of connected flexible wire: 6 mm²
Terminal type: Screw
Compliance with standards: IEC/EN 61095
Contactor type: Silent
Brand: Hager
Model: ERD225S
Rated current of main contacts (AC-1): 25 A
Rated current of main contacts (AC-7a): 25 A
Number of poles: 2
Configuration of main contacts: 2 NO (normally open)
Presence of manual operation: Yes
Rated coil control voltage: 24 V AC
Control voltage frequency: 50/60 Hz
Coil power consumption when turning on: 8 VA
Coil power consumption when holding: 2.8 VA
Rated working voltage of main contacts (Ue): 230 V AC
400 V AC
Rated insulation voltage (Ui): 500 V AC
Rated Impulse withstand voltage (Uimp): 4 kV
Mechanical life: 1,000,000 cycles
Electrical life (AC-1): 100,000 cycles
Maximum switching frequency: 300 operations/hour
Short-time withstand current (Icw): 1 kA (for 1 s)
Operating temperature range: from -10 ° C to + 50 ° C
Storage temperature range: from -40 ° C to + 70 ° C
Protection class: IP20
Mounting type: On a DIN rail
Device width (in modules): 2 modules
Maximum cross-section of connected rigid wire: 10 mm²
Maximum cross-section of connected flexible wire: 6 mm²
Terminal type: Screw
Compliance with standards: IEC/EN 61095
