Hager load switch, 2-pole 125A/400V, SBN299

Number of Poles: 2 P
Pole Type: 2 P
Frequency: 50/60 Hz
Rated Operational Voltage Ue: 400 V0 0 Type
Input Voltage Type 1: AC
Rated Impulse Withstand Voltage: 6000 V
Rated Operational Current in AC21 Category A: 125 A
Rated Operational Current in AC21 Category B: 125 A<2 /5 A1 />Acceptable Current Rating with Category B 22: 125 A
Rated Operational Current in AC23 Category A: 40 A
Acceptable Current Rating with Category B: 40 A
Short-circuit current with gI-gG fuses: 1500 A<0 AC23A: 2115 A
Rated short-circuit power Icm at 415V AC according to IEC 60947-3: 2115 A
Rated short-time withstand current 1s: 1.5 kA
Rated thermal current outside the enclosure: 1 8 W
Total power loss under IN: 16 W
Electrical strength at rated load in operating cycles AC21: 2500
Electrical life at rated load in AC22 in operating cycles: 2500<0 /000 of the installed product: 68 mm
Height of the installed product: 83 mm
Width of the installed product: 35 mm
Tightening torque: 3.6Nm
Cellular clamping position: in-line
Cross-section connection rigid cable: 6/50mm²
Cross-section connection flexible cable: 6/35mm2
Connection type: with screw
Number of NO contacts: 2
IP protection index: IP20
Altitude above sea level: 2000 m
Storage temperature: from -40 to 80°C