Hager H630 Circuit Breaker. In=400A. 4 points, 70kA. LSI, HED401H

Enclosure type: Fixed built-in
Number of poles: 4 P
Pole type: 4P4D N: 0; 50; 100%
Complete device with protection unit: yes
Trip unit: LSI
Integrated earth fault protection: no
Integrated motor drive: no
Frequency: 50/60 Hz
Rated operating voltage Ue>0/000 insulation: 800 V
Rated impulse withstand voltage: 8000 V
With release under voltage: no
Power loss per pole in V: 20.8 W
Power loss per pole at 0.63 * V: at 8.3 W 0.8 W
13.3 W
Total power loss under IN: 62.4 W
Total power loss at 0.63 * V: 24.8 W
Total power loss at 0.8 * V: 39.9 W
Thermal protection switch-off time: 5/9/2/1/2/1/2 opening: 10 ms
Magnetic tripping delay time: from 100 to 200 ms
Electrical endurance in number of cycles: 1000
Number of mechanical operations: 4000
Tightening torque: 22 Nm
Installation />Cross-section connection rigid cable: 35/240 mm2
Cross-section connection Flexible cable: 35/240mm2
Connection: Front connection
Connection type: Terminal
Magnetic protection, installation xIN: 2.5/5/10
Magnetic adjustment range: 2240/2800/3500/45 />Use category: A
IP protection index: IP4X
Storage temperature: from -35 to 70 ° C
Protection against air humidity: for all climatic conditions