Hager H250 Circuit Breaker. In=250A. 4 points, 70kA. LSI, HEC251H

Enclosure type: Fixed built-in
Number of poles: 4 P
Pole type: 4P4D N: 0; 50; 100%
Complete device with protection unit: yes
Trip unit: LSI
Integrated earth fault protection: no
Integrated motor drive: no
Frequency: 50/60 Hz
Rated operating voltage Ue>0/000 insulation: 800 V
Rated impulse withstand voltage: 8000 V
With release under voltage: no
Power loss per pole in V: 24.4 W
Power loss per pole at 0.63 * V: at 9.7 W 0.8 W
15.6 W
Total power loss under IN: 73.2 W
Total power loss at 0.63 * V: 29.1 W
Total power loss at 0.8 * V: 46.9 W
Thermal protection tripping time: 5/8/11/2 ms
Magnetic tripping delay time: 100 to 200 ms
Electrical endurance in number of cycles: 1000
Number of mechanical operations: 4000
Tightening torque: 12 Nm
DIN rail mounting> cross-section rigid cable: 35/185 mm²
Cross-section connection Flexible cable: 35/150mm²
Connection: Front connection
Connection type: Terminal
Magnetic protection, installation xIN: 2.5/5/10
Magnetic adjustment range: 1400/1750/2240/2800 />Use category: A
IP protection index: IP4X
Storage temperature: from -35 to 70 ° C
Protection against air humidity: for all climatic conditions