Hager H1000 Circuit Breaker. In=800A. 4 points, 70kA. LSI, HEE801H

Enclosure type: Fixed built-in
Number of poles: 4 P
Pole type: 4P4D N: 0; 50; 100%
Complete device with protection unit: yes
Trip unit: LSI
Integrated earth fault protection: no
Integrated motor drive: no
Frequency: 50/60 Hz
Rated operating voltage Ue>0/000 insulation: 800 V
Rated impulse withstand voltage: 8000 V
With release under voltage: no
Power loss per pole in V: 51.2 W
Power loss per pole at 0.63 * V: at 0.63 * V: 20.3 W: 32.8 W
Total power loss at IN: 153.6 W
Total power loss at 0.63 * V: 61 W
Total power loss at 0.8 * V: 98.3 W
Thermal protection switch-off time: 5/10/1/1/2 opening: 10 ms
Magnetic switch-off delay time: from 100 to 200 ms
Electrical endurance in number of cycles: 1000
Number of mechanical operations: 4000
Tightening torque: 65 Nm
Installation />Cross-section connection rigid cable: 2x240 mm²
Cross-section connection Flexible cable: 2x240mm²
Connection: Front connection
Connection type: Terminal
Magnetic protection, installation xIN: 2.5/5/10
Magnetic adjustment range: 4480/5600/7000/8960/9 />Use category: A
IP protection index: IP4X
Storage temperature: from -35 to 70 ° C
Protection against air humidity: for all climatic conditions