Hager H1000 Circuit Breaker. In=1000A. 4 points, 50kA. LSI, HNE971H

Enclosure type: Fixed built-in
Number of poles: 4 P
Pole type: 4P4D N: 0; 50; 100%
Complete device with protection unit: yes
Trip unit: LSI
Integrated earth fault protection: no
Integrated motor drive: no
Frequency: 50/60 Hz
Rated operational voltage Ue>0/000 insulation: 800 V
Rated impulse withstand voltage: 8000 V
With live release: no
Rated current correction factor for 2 devices located side by side: 1
Rated current correction factor for 3 devices located side by side current for 4 and 5 devices located side by side: 1
Rated current correction factor for 6 devices located side by side: 1
Power loss per pole in V: 62 W
Power loss per pole at 0.63 * V: 24.6 W 0.8 39.7 W
Total power loss at IN: 186 W
Total power loss at 0.63 * V: 73.8 W
Total power loss at 0.8 * V: 119 W
Thermal protection tripping time: 5/10/11/V 10 ms
Magnetic tripping delay time: 100 - 200 ms
Electrical endurance in number of cycles: 1000
Number of mechanical operations: 4000
Tightening torque: 65 Nm
Rail mounting cross-section rigid cable: 2x240 mm²
Cross-section connection Flexible cable: 2x240mm²
Connection: Front connection
Connection type: Terminal
Magnetic protection setting: xIN: 2.5 / 5/8
Magnetic adjustment range: 5600/7000/8820/10000/00 />Use category: A
IP protection index: IP4X
Storage temperature: from -35 to 70 ° C
Protection against air humidity: for all climatic conditions