Hager circuit breaker x250. In=125A. 4 points. 40kA. Trigger/Mreg., HNB126H

Housing type: Fixed built-in
Number of poles: 4 P
Pole type: 4P4D N: 0; 100%
Complete device with protection unit: yes
Trip unit: TM A / A
Integrated earth fault protection: no
Integrated motor drive: no
Frequency: 50/60 Hz
Rated operating voltage U4/1:5 of insulation: 800 V
Rated impulse withstand voltage: 8000 V
With release under voltage: no
Correction factor of the rated current for 2 devices located side by side: 1
Correction factor of the rated current for 3 devices located current for 4 and 5 devices located side by side: 1
Correction factor of the rated current for 6 devices located side by side: 1
Power loss per pole in V: 9.2 W
Power loss per pole at 0.63 * V: 3.8W 0.8>W
Total power loss under IN: 27.7W
Total power loss at 0.63*V: 11.3W
Total power loss at 0.8*V: 17.7W
Response time when opening: 10 ms
00 />Number of mechanical operations: 4000
Tightening torque: 12 Nm
DIN rail mounting with additional adapter: yes
Cross-section connection rigid cable: 35/185mm²
Cross-section connection Flexible cable: 35/150mm²
Connection: Front connection
Connection type: Terminal
Magnetic adjustment range: 750/1000/1250/1625 A
Use category: A
IP protection index: IP4 C
Protection against air humidity: for all climatic conditions