Contactor Hager ESC464 63A, 4NC, 230V
The Hager ESC464 standard contactor with four normally closed contacts is used for frequent starts of installations with high load currents.
Manufacturer
HAGER
Артикул: ESC464
In stock
Buy in 1 click
2468,89 грн.
Delivery
Self-pickup
By courier in Kyiv - by arrangement.
In Ukraine - according to the carrier's rates center;">(Free delivery when ordering for
from 3000 UAH. for some product groups)
Guarantee
Exchange/return of goods within 14 days
Official warranty from
manufacturer
Cash, non-cash (including VAT).
PrivatBank, Oschadbank
Model: ESC464
Rated current: 63 A
Number of main poles: 4
Main pole contact type: 4NC (Normally closed)
Rated control coil voltage: 230 V AC
Network frequency: 50/60 Hz
Rated operating voltage (Ue): 250/400 V AC
Rated insulation voltage (Ui): 500 V
Rated impulse withstand voltage (Uimp): 4 kV
Utilization category: AC-1
Utilization category: AC-7a
Utilization category: AC-7b
Coil power consumption at switch-on: 25 VA
Coil power consumption in operating mode: 8.2 VA
Electrical endurance (AC-1): 150,000 cycles
Electrical durability (AC-7a): 300,000 cycles
Mechanical durability: 1,000,000 cycles
Maximum cross-section of connected conductors, flexible: 16 mm²
Maximum cross-section of connected conductors, rigid: 25 mm²
Terminal tightening torque: 2.5 Nm
Turn-on time: 10-30 ms
Turn-off time: 10-25 ms
Contact position indication: Yes
Operating temperature: from -10 ° C to + 50 ° C
Storage temperature: from -40 ° C to + 70 ° C
Terminal protection rating: IP20
Enclosure protection rating: IP40
Mounting method: DIN rail
Number of modules on DIN rail: 3
Compliance with standards: EN 61095, IEC 61095
Rated current: 63 A
Number of main poles: 4
Main pole contact type: 4NC (Normally closed)
Rated control coil voltage: 230 V AC
Network frequency: 50/60 Hz
Rated operating voltage (Ue): 250/400 V AC
Rated insulation voltage (Ui): 500 V
Rated impulse withstand voltage (Uimp): 4 kV
Utilization category: AC-1
Utilization category: AC-7a
Utilization category: AC-7b
Coil power consumption at switch-on: 25 VA
Coil power consumption in operating mode: 8.2 VA
Electrical endurance (AC-1): 150,000 cycles
Electrical durability (AC-7a): 300,000 cycles
Mechanical durability: 1,000,000 cycles
Maximum cross-section of connected conductors, flexible: 16 mm²
Maximum cross-section of connected conductors, rigid: 25 mm²
Terminal tightening torque: 2.5 Nm
Turn-on time: 10-30 ms
Turn-off time: 10-25 ms
Contact position indication: Yes
Operating temperature: from -10 ° C to + 50 ° C
Storage temperature: from -40 ° C to + 70 ° C
Terminal protection rating: IP20
Enclosure protection rating: IP40
Mounting method: DIN rail
Number of modules on DIN rail: 3
Compliance with standards: EN 61095, IEC 61095
