Contactor 63A, 2NC, 24V Hager ESD264

Number of poles: 2 P
Frequency: 50 Hz
Rated operating voltage Ue: 400 V
Rated insulation voltage: 440 V
Rated impulse withstand voltage: 4 kV
Acceptable current load with AC7 category A: 63 A
Acceptable current load from AC7 category B: 32 A
Thermal rated current outside enclosures: 63 A
Power: 7 W
Contact discharge 230 V in category A7: 3.3 kW
Contact speed 400 V in category A7 B: 35 kW
Power loss per contact: 5 W
Total power loss under IN: 10 W
Response time when recalling 20 ms
Electrical endurance in a number of cycles: 30,000
Number of mechanical operations: 1,000,000
Depth of the installed product: 60 mm
Height of the installed product: 85 mm
Width of the installed product: 54. fluorescent lamp: 3000 VA
Max. power with fluorescent parallel lamps: 2100 VA
- in a duet circuit: 4700 VA
Max. power with incandescent lamps: 6500 W
Tightening torque: Coil: 2.5 Nm, Power: 3.5 Nm
Max. Cable connection. Cross-section (flexible) for control: 1 to 6 mm²
Connect rigid cable. cross-section. for control: 1 to 10 mm²
Connection cross-section. rigid cable: 4/25mm²
Connection cross-section. flexible cable: 4/16mm2
Connection type: with screw
Number of contacts: 2
Contact type: 2NC
Can be an accessory: yes
Protection class: isol.class II
IP protection index: 2
Storage temperature