Contactor 25A, 4NC, 24V Hager ESD426

Number of poles: 4 P
Frequency: 50 Hz
Rated operating voltage Ue: 400 V
Rated insulation voltage: 440 V
Rated impulse withstand voltage: 4 kV
Permissible current load from A7 category A: 25 A
Permissible current load from AC7 category B: 8.5 A
Rated thermal current outside enclosures: 25 A
Ohm2: 3.4 VA
Contact speed 230 V in AC7 category B: 880 W
Contact speed 400 V in category A7: 13.8 kW
Power loss per contact: 1.5 W
Total power loss under IN: 3.4 W
Opening response: 15 ms
Electrical endurance in a number of cycles: 30,000
Number of mechanical operations: 1,000,000
Depth of installed product: 60 mm
Height of installed product: 83 mm
Installed width
Installed width
Max. fluorescent lamp load: 950 VA
Max. power with fluorescent parallel lamps: 810 VA
- in a duet circuit: 1990 VA
Max. power with incandescent lamps: 1900 W
Tightening torque: 1.2 Nm
Max. Cable connection. Cross-section (flexible) for control: 1 to 6 mm²
Connect rigid cable. cross-section. for control: 1 to 10 mm²
Connection cross-section. rigid cable: 1/10mm²
Connection cross-section. flexible cable: 1/6mm²
Connection type: with screw
Number of contacts: 4
Contact type: 4NC
Can be an accessory: yes
Protection class: isol.class II
IP protection index: 2
Storage temperature: from