Bliss Power Volter Regenerator Bliss Power Volter Regenerator

The regenerator contains 7 elements for the life of a steady stream, the voltage of which is supplied as U-2U (similar to the resistive matrix in solid-state DACs). To control the process of voltage generation, voltage switches are used on field-effect transistors.

  Thus, every 100 microseconds from the voltage, a part of the sinusoid is collected according to the digital standard in the processor. Also, we have a power digital-to-analog converter that generates its output signal directly on the input signal without intermediate conversion and without pulse-width modulation (not to be confused with the power class D). Nonlinear response to the output signal is no more than 0.1%.

    This approach allows you to achieve a high efficiency factor - up to 80%. With this device, it is possible to achieve a low output voltage (lower than the minimum), since the filtering capacities of the devices are supposed to be tens of thousands of microfarads per skin cell, and the voltages of the field-effect transistors that turn on the devices, is measured in tens of mOhms, the inductive support is practically daily.

  An important advantage is that it simultaneously provides a voltage stabilizer in the range of 190 to 255 V output power 1.1 kW with full power galvanic isolation at the edge. Allows you to adjust the output voltage from 1 to 240 V with a pulse of 1 V and the output frequency from 50 to 120 Hz with a pulse of 1 Hz.

A friendly influx to the sound at a higher frequency has been added by PSAUDIO, since it began to produce its famous line of regenerators with the same function.